 |
 |
| |
| |
 |
Tel :0086-577-27821888
Fax :0086-577-62781000
Email:bethy@tuanjie.com
MSN:bethy282@hotmail.com |
| |
 |
| |
|
 |
| Home
>> Product >> Switching
Power>> 320W Single Output Switching
Power Supply (SKS-320) |
320W Single Output
Switching Power Supply (SKS-320) |
|
 |
Features:
-High efficiency, high reliability
-AC input range selected by switch
-100% full load burn-10 test
-Protections: Short circuit/Over load/Over voltage
-Cooling Fan ON-OFF auto control
-Fixed switching frequency at 90KHz
-2 years warranty
-Dimensions: 21541>*115*50mm(L*W*H) |
SPECIFICATIONS
INPUT
Voltage Range |
88~132 VAC/176~264VAC47~63 Hz£»selected
by switch 248~370VDC |
AC Current |
6A/115 V 3.5A/ 230 V |
Efficiency |
77%(SKS-320-5); 80%(SKS-320-7.5); 82%(SKS-320-12); 83%(SKS-320-13.5);
84%(SKS-320-15); 86%(SKS-320-24); 86%(SKS-320-27);
87%(SKS-320-27); |
Inrush Current |
Cold start 20A/115V40A/230V |
Leakage Current |
<3.5mA/240VAC |
OUTPUT
Model |
SKS-320-5 |
SKS-320-7.5 |
SKS-320-12 |
SKS-320-13.5 |
SKS-320-15 |
SKS-320-24 |
SKS-320-27 |
SKS-320-48 |
DC Voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
30V |
48V |
Voltage Tolerance |
±2% |
±2% |
±1% |
±1% |
±1% |
±1% |
±1% |
±1% |
Rated Current |
50A |
36A |
25A |
22A |
20A |
12.5A |
11A |
6.5A |
Current Range |
050A |
036A |
025A |
022A |
020A |
012.5A |
011A |
06.5A |
Rated Power |
250W |
270W |
300W |
297W |
300W |
300W |
297W |
312W |
Ripple & Noise |
150 mVp-p |
150 mVp-p |
150 mVp-p |
150 mVp-p |
150 mVp-p |
150 mVp-p |
200 mVp-p |
240 mVp-p |
DC Adjustment Range |
-10%;+14% |
±20% |
-16%;+10% |
-12%;+11% |
-10%;+20% |
-16%;+10% |
-4%;+18% |
-15%;+17% |
Setup,Rise,Hold Time |
2s,20ms,20ms at full load |
|
|
|
|
|
|
|
PROTECTION
Over Load |
105%~135%
Protection type: Fold back current limiting, recovers
automatically after fault condition is removed |
Over Voltage |
115%~135%
Protection type: hiccup mode, recovers automatically
after fault condition is removed. |
Fan Control |
RT1>=65°C FAN ON, <=55°C
FAN OFF, >=70°C output shutdown (5~15V)
RT1>=65°C FAN ON, <=55°C FAN OFF, >=70°C
output shutdown (5~15V) |
ENVIRONMENT
Working Temp., Humidity |
-10°C~+60°C, 20%~90 %RH |
Storage Temp., Humidity |
-20°C~+85°C, 10%~95 %RH |
Vibration |
10~500Hz, 2G 10min./1cycle, period
for 60min, each along X, Y, Z axes |
SAFETY
Withstand Voltage |
I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG:
0.5KVAC |
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
STANDARD
Safety Standard |
Design refer to UL1950 |
EMC Standard |
Design refer to EN55022, EN55024,
EN61000 |
OTHERS
| Weight |
1.08Kg |
| Packing |
12pcs/13.8Kg/0.98CUFT |
NOTE
1.All parameters NOT specially
mentioned are measured at 230VAC input, rated load and
25°C of ambient temperature. |
2.Ripple & noise are measured
at 20MHz of bandwidth by using a 12"twisted pair-wire
terminated with a 0.1µ &47µ parallel
capacitor. |
3.Tolerance: includes set up
tolerance, line regulation and load regulation |
4.The power supply
is considered a component which will be installed into
a final equipment. The final equipment must be re-confirmed
that it still meets EMC directives. |
|
| |
|
|
