|
 |
| Home
>> Product >> Switching
Power>> 201W Single Output Switching
Power Supply (SKS-201T ) |
201W Single Output
Switching Power Supply (SKS-201T ) |
|
 |
Features:
High efficiency, high reliability
AC input range selected by switch
100%full load burn¨Cin test
Protections: Short circuit/Over load/Over temperature
Cooling by free air convection
Fixed switching frequency at 25KHz
1 years warranty
Dimensions: 215*115*50mm(L*W*H) |
SPECIFICATIONS
INPUT
Voltage Range |
90~132VAC/180~264 VAC47~63Hz;selected
by switch 254~370VDC |
AC Current |
4.5A/115VAC2.5A/ 230 VAC |
Efficiency |
74%(SKS-201T-5); 79%(SKS-100T-7.5); 80%(SKS-201T-12); 82%(SKS-201T-13.5);
81%(SKS-201T-15); 83%(SKS-201T-24; 83%(SKS-201T-27); 84%(SKS-201T-48) |
Inrush Current |
50A/115V50A/230V |
Leakage Current |
<3.5mA/240VAC |
OUTPUT
Model |
SKS-201T-5 |
SKS-201T-7.5 |
SKS-201T-12 |
SKS-201T-13.5 |
SKS-201T-15 |
SKS-201T-24 |
SKS-201T-27 |
SKS-201T-48 |
DC Voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
Voltage Tolerance |
±2% |
±2% |
±1% |
±1% |
±1% |
±1% |
±1% |
±1% |
Rated Current |
40A |
26.5A |
16.5A |
14.7A |
13A |
8.3A |
7.4A |
4.2A |
Current Range |
0-40A |
0-26.5A |
0-16.5A |
0-14.7A |
0-13A |
0-8.3A |
0-7.4A |
0-4.2A |
Rated Power |
200W |
198.75W |
198W |
198.45W |
198W |
199.2W |
199.8W |
201.6W |
Ripple & Noise |
150 mVp-p |
150 mVp-p |
150 mVp-p |
150 mVp-p |
150 mVp-p |
150 mVp-p |
200 mVp-p |
240 mVp-p |
DC Adjustment Range |
-10%,+12% |
±20% |
-16%,+10% |
-12%,+11% |
-10%,+20% |
-16%,10% |
-4%,+18% |
-15%,+17% |
Setup,Rise,Hold Time |
200ms,100ms,20ms at full
load |
|
|
|
|
|
|
|
PROTECTION
Over Load |
115%~135%
Protection type: Shut down o/p voltag, recovers automatically
after fault condition is removed |
Over Voltage |
115%~135%
Protection type: hiccup mode, recovers automatically
after fault condition is removed. |
Over Temp. |
RTH3>=90°C, shut down o/p
voltage, recovers automatically after temperature goes
down |
ENVIRONMENT
Working Temp., Humidity |
-10°C~+50°C, 20%~90 %RH |
Storage Temp., Humidity |
-20°C~+85°C, 10%~95 %RH |
Vibration |
10~500Hz, 2G 10min./1cycle, period
for 60min, each along X, Y, Z axes |
SAFETY
Withstand Voltage |
I/P-O/P: 1.5KVACI/P-FG: 1.5KVACO/P-FG:
0.5KVAC |
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
STANDARD
Safety Standard |
Design refer to UL1950 |
EMC Standard |
Design refer to FCC Part15 J Conduction
Class A |
OTHERS
Weight |
0.93Kg |
Packing |
12pcs/12Kg/0.98CUFT |
NOTE
1.All parameters NOT specially
mentioned are measured at 230VAC input, rated load and
25°C of ambient temperature. |
| 2.Ripple & noise are measured
at 20MHz of bandwidth by using a 12"twisted pair-wire
terminated with a 0.1µ &47µ parallel
capacitor. |
3.Tolerance: includes set up
tolerance, line regulation and load regulation |
|
| |
|
|
