 |
 |
| |
| |
 |
Tel :0086-577-27821888
Fax :0086-577-62781000
Email:bethy@tuanjie.com
MSN:bethy282@hotmail.com |
| |
 |
| |
|
 |
| Home
>> Product >> Switching
Power>> 180W Quad Output Switching
Power Supply (SKQ-180) |
180W Quad Output
Switching Power Supply (SKQ-180) |
|
 |
Features:
-High efficiency, high reliability
-Universal AC input/full range
-100%full load burntest
-Protections: Short circuit/Over load
-Cooling by free air convection
-1 years warranty
-Dimensions: 15041>*140*86mm(L*W*H) |
SPECIFICATIONS
INPUT
Voltage Range |
88~132 VAC / 176~264 VAC47-63Hz£»selected
by switch 248~370VDC |
AC Current |
4A/115 V 2A/ 230 V |
Efficiency |
80% |
Inrush Current |
Cold start 30A/115V60A/230V |
Leakage Current |
<0.5mA/240VAC |
OUTPUT
Model |
SKQ-180-CH1 |
SKQ-180-CH2 |
SKQ-180-CH3 |
SKQ-180-CH4 |
DC Voltage |
5V |
12V |
24V |
-12V |
Voltage Tolerance |
±2% |
±6% |
±5% |
±8% |
Rated Current |
8A |
2A |
4A |
1A |
Current Range |
110A |
0.22A |
0.55A |
0.11A |
Rated Power |
172W |
172W |
172W |
172W |
Ripple & Noise |
80 mVp-p |
150 mVp-p |
200 mVp-p |
180 mVp-p |
DC Adjustment Range |
CH1:-10% |
|
|
|
Setup,Rise,Hold Time |
200ms, 50ms, 16ms |
|
|
|
PROTECTION
Over Load |
105%~135% |
| |
Protection type: Shut down o/p
voltage, re-power on to recover |
ENVIRONMENT
Working Temp., Humidity |
-10°C~+50°C, 20%~90 %RH |
Storage Temp., Humidity |
-20°C~+85°C, 10%~95 %RH |
Vibration |
10~500Hz, 2G 10min./1cycle, period
for 60min, each along X, Y, Z axes |
SAFETY
Withstand Voltage |
I/P-O/P: 1.5KVACI/P-FG: 1.5KVACO/P-FG:
0.5KVAC |
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:500VDC/100M¦¸ |
STANDARD
Safety Standard |
Design refer to UL1012 |
EMC Standard |
Design refer to EN55022,EN61000-3-2,-3,
EN61000-4-2,3,4,5,6,8,11; ENV50204 |
OTHERS
Weight |
1.28Kg |
Packing |
8pcs/11.24Kg/0.95CUFT |
NOTE
1.All parameters
NOT specially mentioned are measured at 230VAC input,
rated load and 25°C of ambient temperature. |
2.Ripple & noise are measured
at 20MHz of bandwidth by using a 12"twisted pair-wire
terminated with a 0.1µ&47µ parallel
capacitor. |
3.Each output can within current
range. But total output power can't exceed rated load. |
4.The power supply
is considered a component which will be installed into
a final equipment. The final equipment must be
re-confirmed that it still meets EMC directives. |
|
| |
|
|
