 |
 |
| |
| |
 |
Tel :0086-577-27821888
Fax :0086-577-62781000
Email:bethy@tuanjie.com
MSN:bethy282@hotmail.com |
| |
 |
| |
|
 |
| Home
>> Product >> Switching
Power>> 150W Single Output Switching
Power Supply (SKS-150) |
150W Single Output
Switching Power Supply (SKS-150) |
|
| 2.Ripple & noise are measured at 20MHz of bandwidth
by using a 12"twisted pair-wire terminated with a 0.1µ
&47µ parallel capacitor. |
|
Features:
-High efficiency, high reliability
-AC input range selected by switch
-100% full load burn-10 test
-Protections: Short circuit/Over load/Over voltage
-Cooling by free air convection
-Fixed switching frequency at 25KHz
-2 years warranty
-Dimensions: 19941>*110*50mm(L*W*H) |
SPECIFICATIONS
INPUT
| Voltage Range |
88~132 VAC/176~264VAC47~63Hz, selected by switch248~370VDC |
| AC Current |
3.2A/115 V 1.6A/ 230 V |
| Efficiency |
78%(SKS-150-5); 80 %(SKS-150-9); 82%(SKS-150-12); 83%(SKS-150-13.5);
84%(SKS-150-15); 85%(SKS-150-24); 86%(SKS-150-27);
87%(SKS-150-48); |
| Inrush Current |
Cold start 35A/230VAC |
| Leakage Current |
<3.5mA/240VAC |
OUTPUT
| Model |
SKS-150-5 |
SKS-150-9 |
SKS-150-12 |
SKS-150-13.5 |
SKS-150-15 |
SKS-150-24 |
SKS-150-27 |
SKS-150-48 |
| DC Voltage |
5V |
7.5V |
12V |
13.5V |
15V |
24V |
27V |
48V |
| Voltage Tolerance |
±2% |
±1% |
±1% |
±1% |
±1% |
±1% |
±1% |
±1% |
| Rated Current |
30A |
16.7A |
12.5A |
11.2A |
10A |
6.5A |
5.6A |
3.2A |
| Current Range |
030A |
016.7A |
012.5A |
011.2A |
010A |
06.5A |
05.6A |
03.2A |
| Rated Power |
150W |
150.3W |
150W |
151.2W |
150W |
156W |
151.2W |
153.6W |
| Ripple & Noise |
150 mVp-p |
180 mVp-p |
180 mVp-p |
180 mVp-p |
180 mVp-p |
240 mVp-p |
240 mVp-p |
240 mVp-p |
| DC Adjustment Range |
±10% |
-12%;+15% |
-12%;+10% |
-12%;+11% |
±10% |
-12%;+16% |
-12%;+11% |
±10% |
| Setup,Rise,Hold Time |
100ms,50ms
,20ms at
full load |
|
|
|
|
|
|
|
PROTECTION
| Over Load |
110%~160%
Protection type: Shut down o/p voltage, re-power on to
recover |
| Over Voltage |
115%~135%
Protection type: Shut down o/p voltage, re-power on to
recover |
ENVIRONMENT
| Working Temp., Humidity |
-10°C~+60°C, 20%~90 %RH |
| Storage Temp., Humidity |
-20°C~+85°C, 10%~95 %RH |
| Vibration |
10~500Hz, 2G 10min./1cycle, period for 60min, each
along X, Y, Z axes |
SAFETY
| Withstand Voltage |
I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
OTHERS
| Weight |
0.8Kg |
| Packing |
16pcs/13.8Kg/0.95CUFT |
NOTE
| 1.All parameters NOT specially mentioned are measured
at 230VAC input, rated load and 25°C of ambient temperature. |
| 2.Ripple & noise are measured at 20MHz of bandwidth
by using a 12"twisted pair-wire terminated with a 0.1µ
&47µ parallel capacitor. |
| 3.Tolerance: includes set up tolerance, line regulation
and load regulation |
4.The power supply is considered
a component which will be installed into a final equipment.
The final equipment must be re-confirmed that it still meets
EMC directives. |
|
| |
|
|
