|
 |
| Home
>> Product >> New
Product >> 12W Single Output Switching
Power Supply (SKS-12) |
12W Single Output
Switching Power Supply (SKS-12)
|
|
Features:
-High efficiency, high reliability, low cost
-Universal AC input/full range
-100%full load burnin test -Protections: Short circuit/Over
load
-Cooling by free air convection -1 years warranty
-Dimensions: 7-9*51*28mm(L*W*H)
SPECIFICATIONS INPUT
| Voltage Range |
85~ 264VAC |
| AC Current |
0.28A/115V,0.14A/230V |
| Efficiency |
68%(SKS-12-5); 70%(SKS-12-7.5);
76%(SKS-12-12); 77%(SKS-12-15); 80%(SKS-12-24); |
| Inrush Current |
Cold start 15/ 115 VAC 20A/ 230
VAC |
| Leakage Current |
< 1.0 mA/240VAC |
OUTPUT
| Model |
SKS-12-5 |
SKS-12-7.5 |
SKS-12-12 |
SKS-12-15 |
SKS-12-24 |
| DC Voltage |
5V |
7.5V |
12V |
15V |
24V |
| Voltage Tolerance |
±2% |
±2% |
±1% |
±1% |
±1% |
| Rated Current |
2A |
1.5A |
1A |
0.9A |
0.6A |
| Current Range |
0-2A |
0-1.5A |
0-1A |
0-0.9A |
0-0.6A |
| Rated Power |
10W |
11.3W |
12W |
13.5W |
14.4W |
| Ripple & Noise |
60mVp-p |
80 mVp-p |
100 mVp-p |
100 mVp-p |
120 mVp-p |
| DC Adjustment Range |
±10% |
±10% |
±10% |
±10% |
±10% |
| Setup,Rise,Hold Time |
1.5s,50ms,20ms |
Setup,Rise,Hold Time |
1.5s,50ms,20ms |
Setup,Rise,Hold Time |
1.5s,50ms,20ms |
PROTECTION
Over Load |
110%~135% |
| |
Protection type: Shut down o/p
voltage, recovers automatically after fault condition
is removed |
ENVIRONMENT
| Working Temp., Humidity |
-10°C~+50°C;20%~90 %RH |
| Storage Temp., Humidity |
-20°C~+85°C;10%~95 %RH |
| Vibration |
10~500Hz,2G 10min./1cycle,period
for 60min, each along X, Y, Z axes |
SAFETY
| Withstand Voltage |
I/P-O/P: 1.5KVACI/P-FG: 1.5KVACO/P-FG:
0.5KVAC |
| Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms
/ 500VDC |
STANDARD
| Safety Standard |
Design refer to UL1020 |
| EMC Standard |
Design refer to EN61000-4-2,3,4,5,
EN55022, 2002/95/95/EC |
OTHERS
| Weight |
0.16Kg |
| Packing |
60pcs/11Kg/1.2CUFT |
NOTE
| 1.All parameters NOT specially
mentioned are measured at 230VAC input, rated load and
25°C of ambient temperature. |
| 2.Ripple & noise are measured
at 20MHz of bandwidth by using a 12" twisted pair-wire
terminated with a 0.1µ&47µ parallel
capacitor. |
| 3.Tolerance: includes set up
tolerance, line regulation and load regulation |
|
| |
|
|
